All HMT

The HMT CarbideMax range uses Premium Grade Sandvik Tungsten Carbide teeth, one of the hardest materials available for use in cutting tools. This means cutters are capable of drilling through the toughest steels whilst maintaining their strength & cutting surface for up to 10x longer than traditional HSS cutters. The elaborate geometry of CarbideMax broach cutters means the teeth of the cutter...

HMT Weldon Magnet Drill Countersinks now come with the benefit of the special GoldMax? coating for increased tool life, even if used without lubricant. Standard 19.05mm Weldon shank for use in all standard magnet drills.GoldMax coating keeps countersinks sharp much longer than standard HSS tools, Save money with longer life tooling. Min start size 4mm 47mm OAL Standard 19.05mm Weldon shank for use...

The VersaDrive Countersink is a premium quality countersink with fully ground flutes and Titanium coating to help reduce wear and blunting. VersaDrive Countersinks have a patented non-slip, Hex shank suitable for use in any standard 1/2' drill chuck for cordless or pistol drills or used with a VersaDrive Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills. Utilise the...

The VersaDrive Drillsink is an innovative combined drilling & countersinking tool to save metalworkers time & increase hole accuracy by drilling & then countersinking fixing holes in one operation. This combination tool provides perfect countersinking accuracy every time by locating the drilled hole in perfect alignment to the countersink. This helps prevent tool chatter and blunting commonly found...

Interchangable broaching pilot pins converts the HMT 101030 CarbideMax TCT Holesaw system into a broaching cutter. Combine with 111030-0001 Versadrive Weldon adapter. Also used for using the 101030 holesaws with the Multisink system for combination broaching and countersinking. Can also be used as a holesaw guide pin into a pre-drilled 6.35mm hole; Ground flute with locating flat for grub screwCan...

VersaDrive reamers are the perfect hole alignment and enlarging tool for metalworkers & steel erectors for keeping the job moving when a hole is misaligned or the incorrect size for the fixing. Featuring a specially designed 6 flute cutting geometry and Titanium coating, VersaDrive Reamers are fully Impact rated and perform fastest when used with an Impact wrench providing ultimate cutting performance...

The HMT VersaDrive IMPACTASTEP Cutter Set is the perfect tool for drilling and reaming materials up to 12mm thick. This 3-piece set includes the 506010-160, 506010-220, and 506020-260 Cutters, all conveniently stored in a handy carry case. The IMPACTASTEP Cutter is a VersaDrive exclusive innovation that combines drilling and reaming capabilities in one versatile tool. It features 5 individual cutting...

VersaDrive ImpactaTaps are the first and only range of taps that are suitable to be driven by impact wrenches and impact drivers, providing at least 15x faster performance than tapping by hand. With a specially designed twin-lead, cutting geometry - the dual hardening process with Titanium coating provides a fantastic solution for tapping holes in steel. VersaDrive ImpactaTaps have a patented non-slip,...

Extends the working reach of all VersaDrive toolsRapid-Lock, single handed loading action and can also be usedin combination with other Versadrive adaptersHex shank for non-slip use in any drill chuckImproved Quick Release collar that prevents accidental tool release caused by vibrations or contact with the workpieceKnurled collar - ultimate grip in greasy or damp conditionsHigh quality, Heavy Duty...

This upgraded SDS+ VersaDrive adapter features: New Rapid-Lock, single handed loading action Improved Quick Release collar that prevents accidental tool release caused by vibrations or contact with the workpiece Knurled collar - ultimate grip in greasy or damp conditions High quality, Heavy Duty steel components Converts all standard SDS+ Rotary Hammer Drills for use with VersaDrive system (In rotary...

The first step drill optimised for use with impact wrenches and impact drivers allowing the user to create holes in seconds. Featuring a spiral flute design with self-starting drill tip, for fast, smooth drilling with a rotary drill or impact wrench and market leading 5mm thick drilling capacity. VersaDrive Step Drills have a patented non-slip, Hex shank suitable for use in any standard 1/2' drill...

VersaDrive TCT Holecutters are a high performance solution for cutting larger diameter holes quickly and effectively. Premium grade Tungsten carbide teeth provide ultimate cutting performance in a wide range of Structural steels including Stainless Steel and Cast Iron. These are rapidly becoming the go-to, alternative solution for fabricators and steel erectors needing to drill through heavy steel...

VersaDrive TCT Holecutters are a high performance solution for cutting larger diameter holes quickly and effectively. Premium grade Tungsten carbide teeth provide ultimate cutting performance in a wide range of Structural steels including Stainless Steel and Cast Iron. These are rapidly becoming the go-to, alternative solution for fabricators and steel erectors needing to drill through heavy steel...

VersaDrive TurboTip Impact drill bits are stepped tip bits that drill at twice the speed of standard bits without the need for pilot drilling while cutting a perfectly round hole. Turbocharge your drilling performance by using this revolutionary tool with an impact wrench or impact driver. Double hardened and titanium coated for faster drilling & reduced wear. VersaDrive TurboTip drill bits have a...

The HMT VersaDrive V35 is the first UK Built portable drilling machine designed for high-performance, low-maintenance, industrial quality drilling up to 35mm diameter. It delivers constant performance in the most challenging drilling environments and fabrication conditions. This machine fills a gap in the market for extremely light weight, high drilling speed, and long stroke to accept a wide range...

500ml Biocut Blue is a ultra high-performance cutting fluid designed for metal fabrication broaching, cutting, and drilling tasks. Ideal for use with hard materials or ultra-large or ultra-thick steel. Water-soluble fluid supplied ready-for-use Inherently bio-degradable, can be 100% removed with water Synthetic based, chlorine free, with zero mineral oils No adverse affects for welding and galvanising Excellent...

Quality Magnetic Swarf lifter for safe and efficent removal of metal swarf from the cutting area.Strong magnet with release handle and 400mm overall length.

The STAKIT SiteCart is a wheeled base unit with adjustable height handle and robust, water and dust proof construction. The case can be used on its own for large equipment storage or combined with the rest of the STAKIT system to transport tooling and cases to and around the job site or workshop. The case is designed to be tilted and pulled, has a handy narrow size and is easy to manoeuvre. Supplied...